How to low-level format a hard drive? Here are the detailed steps!
1. Tips: Low-level formatting of the hard disk will erase all data, please be sure to back up in advance. This operation is risky and should be carried out with caution!
2. First, prepare a USB flash drive and make it into a boot disk.
3. After the production is completed, you need to set the computer to boot from the USB flash drive. If you are not sure how to set it up, you can refer to the following links:http://www.qiuyexitong/bios/ Make specific configurations.
4. Insert the USB disk into the USB interface of the computer, enter the USB disk boot interface after booting, and select the latest version of the DiskGenius partition tool, as shown in the figure below:
5. Enter the LFORMAT command in the multi-function classic DOS tool menu, as shown in the following figure:
6. After pressing the enter key, enter the y key in the interface that appears to enter the Low level formatter… 1.1!!! Procedure. Here, the Select Device option is used to select a specific partition for low-level formatting, while the Low level Current Device is used to perform low-level operations on the entire disk, as shown in the following image:
7. In this example, we will perform low-level operations on the entire hard disk. Use the ↑ and ↓ arrow keys to select Low level Current Device, press Enter to confirm, and then select Y according to the prompts to start the low-level formatting process, as shown in the figure below:
